25mm² HOFR Double Insulated, Heater Distribution Copper Cables
Product Code : PWHT-7019
25mm² HOFR Double
Insulated, Heater Distribution Copper Cables
The 25mm² cable supplies electrical energy to heaters. Used in Splitter Cables, each roll has 100m length of cable.
Higher Current Rating and Emergency Overload rating
Superior short circuit rating
Low Dielectric loss
Much better insulation resistence
Resistant to chemical & corrosive gases etc.,
Better resistance to surge currents
Much Longer life of the cables
Insulated Material:
XLPE
PVC
PVC Insulated Cable:
High Dielectric strength & resistance to D.C. voltage effects.
High mechanical strength & resistance to abrasion, vibration & ageing.
Resistance to most acids, alkalies, to temporary contact with solvents, oils and liquid fluids.
Used as a output power cable from Low voltage heat treatment machine to splitter cable
Dimensions of Roll: 100 H x 450 W x 45 D mm
Length of Cable: 100m
Weight: 31kg
Materials: Copper cable
Wire Diameter: 25mm²
Insulation: double insulated with rubber jackets
Colour: Outer Jacket is Red, Inner Jacket is White
Physical Parameters:
Minimum No. of Strand in Conductor:
Aluminium-6 / COpper-6
Nominal Insulation Thickness: 1.20mm
Nominal Outer Sheath Thickness:1.80mm
Approx. Overall Dia of Cable: 12mm
.png)
 (5).png)
 post heating.png)
.png)
 1.png)
.png)
.png)
 Complete Set.png)
 Complete Set.png)
.png)
.png)
.png)
.png)
 Complete Set.png)
 Complete Set.png)
.png)
.png)
.png)
.png)
.png)
