FY400 / FU48 TAIE PID Controller
Product Code : PWHT-7047
FY400 / FU48 TAIE
PID Controller
TAIE Make FU Series controllers are microprocessor based controllers. Which have been designed with high accuracy input, various output selection, useful options and good reliability at a competitive price
FU Series use "PID + FUZZY" algorithm to implement excellent control.
The Output status is displayed on the built in "Bar-Graph" display.
FU series also provide "Programmable RAMP/SOAK" function and has 2 patterns by 8 segments to elevate or decrease temperature.
FU series support MODBUS protocol. Communication with HMI is more convenient.
Completely correspond to any kinds of input signal like Thermocouple, RTD PT100 and DC4~20mA, 0~5V etc.,
Satisfy any requests for output mode like DC4~20mA, 0~5V Voltage, Current & the relay output of capacity 8A.
It provides with 3 feautures of Controller, Signal converter and Alarm monitor. It can be changed the signal of mV, V, RTD to the output of Voltage & Current 4~20mA instead of the signal converter.
Separately design for signal circuit and power on PC board, effectively restrain the external interference of electric wave.
Model: FY400 / FU48
Dimension: 48X48mm
Supply voltage AC 85~265V¼ DC 15~50V (Option)
Frequency: 50 / 60 HZ
Power consumption: Approx 3VA
INPUT:
Accuracy: 0.2 % FS ± 1digit
Sample time: 250ms
TC: K , J , R , S , B , E , N , T , W5Re/W26Re , PLII , U , L
RTD: PT100,JPT100,JPT50
mA dc: 4~20mA ,0~20mA
mV / V dc: 0~1V,0~5V,0~10V,1~5V,2~10V
-10~10mV,0~10mV,0~20mV,0~50mV,10~50mV
Decimal point position: 0000 , 000.0 , 00.00 , 0.000 Available for linear input (mA / mV / V)
Output 1:
Relay: SPST type 3A , 220V , electrical life:100,000 times or more (under rated load)
Voltage pulse: For SSR drive. ON : 24V , OFF : 0V , max load current : 20mA
mA dc: 4~20mA, 0~20mA. Maximum load resistance:560 „¦
Voltage dc 0~5V , 0~10V , 1~5V , 2~10V . Max load current:20mA
Alarm 1: 3A , 220V , electrical life:100,000 times or more (under rated load)
Control algorithm: PID¼ PI¼ PD¼ P¼ ON / OFF(P=0)¼ FUZZY‚
PID range: P: 0.0 ~ 200.0 %¼ I: 0~3600s¼ D: 0~900s
Isolation: Output terminals (control output , alarm , transmission) and input terminals are isolated separately.
Isolated resistance: 10M„¦ or more between input and case (ground) at DC 500 V
10M„¦ or more between output and case (ground) at DC 500 V
Dielectric strength: 1000V AC for 1 minute between input terminal and case (ground)
1500V AC for 1 minute between output terminal and case (ground)
Operating temperature: 0~50„ƒ
Humidity range: 20~90%RH
Weight: 150g
Display Height: PV:7mm / SV:7mm
Programmable: 2 patterns with 8 segment each.
RAMP/SOAK: The 2 patterns can be linked together as 16 segments use.
.png)
 (5).png)
 post heating.png)
.png)
 1.png)
.png)
.png)
 Complete Set.png)
 Complete Set.png)
.png)
.png)
.png)
.png)
 Complete Set.png)
 Complete Set.png)
.png)
.png)
.png)
.png)
.png)
