CHINO EL 3000 Series Dot Printing Type Analog Recorder

CHINO EL 3000 Series Dot Printing Type Analog Recorder

Product Code : PWHT-7046

CHINO EL 3000 Series Dot Printing Type Analog Recorder

EL 3000 Series is a dot printing type analog recorder4 sized 144 X 144mm with 100mm Width chart. The unit starts recording as soon as the power supply and input are connected and it is also easy to operate. Scale plate, input range and function of the recorder can be selected for various purpose and applications as many kinds of options are prepared.

Universal Power Supply

Universal power supply with voltage range of 100 to 240 V AC (50/60Hz) is applied.

Linear temperature scale

Temperature scale of thermocouple and resistance thermometer input is a linear scale that is excellent in reading value.

Standard 6 Chart speeds

6 Chart speeds (5, 10, 20, 40, 80, 160mm/h) are swichable as standard.
5 chart speed and hour/minute change are prepared as option.

Input Specifications

Measurement Point: 1,2,3 and 6 Points
Reference range and types:
DC voltage: ±13.8mV, ±27.6mV, ±69mV, ±200mV,±500mV, ±2V, ±5V
Built-in voltage divider : ±10V, ±25V, ±50V
DC current: External installation of shunt resistor (250Ω) is applied (option)
Thermocouples: K, E, J, T, R and B (option)
Resistance Thermometer: Pt100(1997) (Measured current: 1mA)
Linear scale for thermocouple and resistance thermometer.
Input designation: Single scale (standard), double scale (option)
Accuracy rating: ±0.5% of input scan (except for some input under standard operating condition)
Refer to the table of standard range and minimum width of scale for non-standard input.
Indicating deadband 0.3% of input span
Reference junction compensation accuracy: K, E, J, T ±1.0℃ or below (23℃±10℃)
±2.0℃ or below (0℃ to 50℃)
(For internal reference junction compensation, the errors above are added to the accuracy rating)
Temperature drift: ±0.02%FS / ℃ (Converted into reference ranges)
Measurement Cycle: 6 Seconds/point
Indicating resolution: Approximately 1/2,000
Burnout (Option): On thermocouple or resistance thermometer input, disconnection of signal can be detected.(Up-scale and down scale burnout on all channels can be programmed).
Burnout detection - Voltage application method (approximately 8V, 1mA)
Allowable signal source resistance:
Thermocouple inputs, DC Voltage Inputs (±5V or less)
1kΩ(burnout disabled) or less.
DC Voltage inputs (more than ±5V) - Approximately 1MΩ
Input resistance: Thermocouple inputs, DC Voltage inputs (±5V or less) - Approximately 8MΩ
DC Voltage inputs (more than ±5V) - Approximately 1MΩ
Maximum input voltage:
Thermocouple inputs, DC voltage inputs - ±10V DC or less
DC voltage inputs (voltage divider built-in) ±60V DC or less
Resistance thermometer ±6V DC or less
Maximum common mode voltage: 30V AC
Common mode rejection ratio: 120dB or more (50/60Hz ±0.1%)
Normal mode rejection ratio: 50dB or more (50/60Hz ±0.1%)

Recording Specifications

Recording Accuracy: ±0.5% of recording span
Recording system: Inkpad dotting
Balancing Time: Input span movement - approximately 2 seconds
Recorder Color: 1-Red, 2-Blue, 3-Green, 4-Violet, 5-Purple, 6-Brown.
Chart paper: Fan-fold type total width of 114mm, total length of 10m, effective chart width 100mm
Chart speed: 6 Speed change 5,10,20,40,80,160mm/h(standard)
Chart speed accuracy: ±0.1% or less (It is based on the chart scale)

General Specifications

Rated power voltage: 100 to 240V AC, 50/60Hz (Universal Power supply) with power supply switch
Power consumption: Maximum 12VA (100V AC)
Maximum 20VA (240V AC)
Environmental conditions:
Reference operation condition
Ambient temperature range: 21 to 25℃
Ambient humidity range: 45 to 65%RH
Power voltage: 100V AC ±1%
Power frequency: 50/60Hz ±0.5%
Attitude: left/right 0℃, forward tilting 0℃, backward tilting 0℃
Warm-up time: longer than 30 minutes
Normal operation condition:
Ambient temperature range: 0 to 50℃
Ambient humidity range: 20 to 80%RH
Power voltage: 90 to 264V AC
Power frequency: 50/60Hz ±2%
Attitude: left/right 0 to 10°, forward tilting 0°, backward tilting 0 to 20°
Case:
Door (frame): ABS resin, Door window: Glass, Back Case: ABS Resin
Color: Door Frame: Black (equivalent to Munsell N1.5)
Door window: Transparent
Back case: Black (equivalent to Munsell N1.5) Mounting: Panel mounting
Weight: Approximately 1.7kg
Power Voltage Fluctuation: Indication fluctuation 0.2% or less (conversed into reference ranges at 90 to 264V AC)

Select quantity

Related Products